Applicable to: fans, water pumps, central air conditioners, cooling towers, escalators, conveyor belts, plastic machinery, etc.
Key features:
- Without speed sensing vector control, the carrier frequency is automatically optimized according to the radiator temperature and output current.
- Unique magnetic flux compensation function maximizes output torque.
- Up to 4 inverters can be connected in parallel.
- The optional active front-end module can feed energy back to the power side to maintain DC bus voltage stability when the grid-side voltage fluctuates.
- Frequency hopping function, forward/reverse jog function.
- Smart startup after power interruption.
- Constant pressure water supply control supports sleep mode.
- Supports regular and reverse-enabled dual PID control.
- Comes with two universal programmable timing controllers.
- RS458 interface supports MODBUS and BACnet protocols.
- Parameters can be set and downloaded through the USB interface, and the operating status of the inverter can be recorded through the USB interface by inserting an SD card.
- EMC compatible.
- IP30, IP66, IP54 and stainless steel body packaging.
Z8R series Input voltage: 380Vac (-15%) to 480V (+10%) Output voltage: 0 to 480Vac, 3-phase, 0-200Hz Z8L series Input voltage: 208Vac (-15%) to 246V (+10%) Output voltage: 0 to 240Vac, 3-phase, 0-200Hz Z8J series Input voltage: 440Vac (-15%) to 600V (+10%) Output voltage: 0 to 600Vac, 3-phase, 0-200Hz single phase power supply Suitable for 240V, 480V single-phase power supply. IP rating IP30 (NEMA1) or IP66 (NEMA4) Stainless steel: IP66 (NEMA4) control specifications Control system: sensorless flux vector, sinusoidal encoded PWM Frequency range: 2 to 16KHz (maximum depends on load, speed and temperature) Frequency resolution: 0.10% Frequency linearity: 0.20% of maximum frequency Standard specifications
Optional
| user interface Display: Universal English LCD screen User-defined variables and display units Optional Chinese LCD screen Local Control Up, down, confirm, cancel, stop/reset. speed reference Local: Up/Down buttons. Analog input:
Preset speeds: 7 programmable speeds. Inching potentiometer: remote rise/fall speed control. Potentiometer: +5V reference value for remote speed ESO forced operation. Input Thermistor input: thermistor, micro-heat, thermal switch or thermal overload. Numeric input:
Choices: forced run, forward, reverse, forward latch, reverse latch, forward jog, reverse jog, remote, rise, fall stop/reset. Output Digital output: 2 programmable function relays, additional relays available as options. Select: running, fault, ESO, waiting for operation, zero speed, constant speed, low speed, overspeed, pull-in, disconnection, automatic restart failure, forward, reverse, enable, I2t fault, over-temperature, over-current, preset Charging contactor control, analog input upper and lower limit alarms, timer 1, 2 output. Analog output:
Select: output frequency, output speed, output load percentage, output current, output DC voltage, output power, output voltage, AC input voltage, radiator temperature, I2t. |